Paper machine

A paper machine (or papermachine or paper-making machine) is an industrial machine which is used in the pulp and paper industry

to create paper in large quantities at high speed. Modern paper-making machines are based on the principles of the Fourdrinier Machine, which uses a moving woven mesh to create a continuous paper web by filtering out the fibres held in a paper stock and producing a continuously moving wet mat of fibre. This is dried in the machine to produce a strong paper web.

The basic process is an industrialised version of the historical process of hand paper-making, which could not satisfy the demands of developing modern society for large quantities of a printing and writing substrate. The first modern paper machine was invented by Louis-Nicolas Robert in France in 1799, and an improved version patented in Britain by Henry and Sealy Fourdrinier in 1806.

The same process is used to produce paperboard on a paperboard machine.

Process sections

Paper machines usually have at least five distinct operational sections:

Forming section, commonly called the wet end or wire section, is a continuous rotating wire mesh which removes water from the paper by sucking it out of suspension via vacuum.

Press section, where the wet fibre web passes between large rolls loaded under high pressure to squeeze out as much water as possible.

Drying section, where the pressed sheet passes partly around, in a serpentine manner, a series of steam heated drying cylinders. Drying removes the water content down to a level of about 6%, where it will remain at typical indoor atmospheric conditions.