Nottingham alabaster

Nottingham alabaster is a term used to refer to the English sculpture industry, mostly of relatively small religious carvings, which flourished from the fourteenth century until the early sixteenth century. Alabaster carvers were at work in London, York and Burton-on-Trent, and many probably worked very close to the rural mines, but the largest concentration was around Nottingham. This has led to all the English medieval output being referred to as "Nottingham alabaster".

Alabaster, a mineral composed of gypsum and various impurities, is much softer and easier to work than marble and a good material for mass production, though not suitable for outdoor use. Carvings were made as single figures, assemblies for tomb monuments, including full length effigies, but the most common survivals are panels, up to about 20 inches or 50 cm high, from sets for altarpieces, which could be transported relatively easily, and fitted into a locally made architectural surround of stone or wood on arrival at their destination. These were attractive for less wealthy churches, and for the private chapels of the nobility. Some complete ensembles survive, showing varied numbers of panels; the dimensions of the Nativity illustrated are typical. The subjects were the same as in painted altarpieces, often including short cycles of the Life of Christ, especially the Passion of Christ, or the Life of the Virgin. Since the sets were probably generally not made to a specific commission, unlike paintings, there are fewer local or patron saints.

Throughout the period of their production Nottingham alabaster images were hugely popular in Europe and were exported in large quantities, some ending up as far afield as Iceland, Croatia and Poland.